| Brand Name: |
Tiger Claw Installation Gun |
|
|
| Origin: |
Manufactured in Taiwan |
|
|
| Manufacturer |
Basso Industry Corp |
|
|
| Appearance |
Silver body with black trim |
|
|
| Dimensions: |
16" long x 5" wide x 14"
height - Retail Unit
11" long x 4" wide x 13"
height - Tool Only |
|
|
| Weight |
9 lbs. (4 kg) Retail Unit
5 lbs. (2.3 kg) Tool Only |
|
|
| Operating Pressure |
80-100 PSI Normal
125 PSI Max |
|
|
| Compatible Pneumatic Screw |
TC-SG: Coated Steel Pneumatic Screws
TC-SS: Stainless Steel Pneumatic Screws |
|
|
| Compatible Fasteners |
Tiger Claw® TC-G (150)
TimberTech CONCEALoc
Trex HideAway
Fasco InvisiDeck Fastener
Beck InvisDeck Hidden SCRAIL® Fastener
Guardian Ghost Grip™ |
|
|
| Compatible Decking |
Any decking with a standard groove
in the edge such as Fiberon with the Tiger
Claw® TC-G (TC-150), Portico™, Latitudes®, TUFdeck
Veranda™, Trumarc, Monarch®, Gossen®,
Trex™, TimberTech®,
Guardian, and pre-grooved hardwoods
Most solid edge board thicker than
7/8" can be grooved to work with the TC-G (TC-150) |
|
|
| Retail Unit Contents |
Installation Gun, Safety Glasses,
Pneumatic Tool Oil, Hex Key Kit, Replacement Parts Kit, Installation Instructions,
Pneumatic Gun Manual, Carry Case |
|
|
| Time Saving |
For Installing a 16 foot deck board
3 min 26 sec - traditional face screwing
2 min 2 sec - face screwing with
Quick Drive
1 min 18 sec - Tiger Claw Installation
Gun |
|
|
|
FAQ |
|
|
| How is the gun powered? |
The gun is pneumatic and
is powered by air from a standard compressor or CO2 tank. |
|
|
| What is the recommended PSI setting? |
Hose pressure should be
set between 80-100 PSI |
|
|
| Is there any technique to using it? |
Yes, there is a process
for proper installation. Fully review instructions carefully before using. |
|
|
| Is there any preventative maintenance
required? |
Place 3 drops of oil into the air fitting before each job to prevent wear of mechanical parts.Store the tool in it's carry case when not in use to prevent damage and corrosion |
|
|
| What fasteners will work with the
gun? |
The gun will work with
Tiger Claw TC-G (TC-150),TimberTech
CONCEAloc®, TrexHideAway™, Fasco America InvisiDeck Hidden™ SCRAIL® Fasteners, Beck InvisiDeck Hidden™ SCRAIL® Fasteners, and Guardian Ghost
Grip |
|
|
| Can I use “fasteners packaged with
screws” with the gun? |
Yes, but TC-SG or TC-SS pneumatic screws would
have to be purchased separately.Screws
included in normal packaging are not collated and are not for use with
the gun. |
|
|
| Can I get fasteners without the bagged
screws? |
Yes, Tiger Claw TC-G (TC-150),
TimberTech CONCEAloc®,Trex HideAway™,Fasco America InvisiDeck Hidden™
SCRAIL® Fasteners, Beck InvisiDeck Hidden™ SCRAIL®
Fasteners, and Guardian Ghost Grip fasteners are available in buckets
of 900 fasteners without screws. TC-SG and TC-SS pneumatic screws are
available in boxes of 930 and sold separately.TrexHideAway™ and TimberTech CONCEAloc® are both available in 900 ct. buckets with TC-SG
collated pneumatic screws included inside. |
|
|
| Will any screws work in the gun? |
No, the gun is designed
to work with TC-SG screws which are 1 ½” pneumatic screws
collated at 33 degree angle. |
|
|
| How many screws are on a strip? |
Each strip has 30 screws
and comes in a box containing 31 strips (930 count). |
|
|
| What is the warranty on the gun? |
If your gun ever brakes,
Tiger Claw will replace it at no charge.
* Program subject to change. |
|
|
| Does it have good upheaval strength? |
The fastener brands have
been independently tested through Architectural Testing Inc. Each brand
has surpassed ICC upheaval recommendations. |
|
|
| What is the cost of the gun? |
The guns MSRP is $279.00 |
|
|
| Where can I purchase the gun? |
The gun is available wherever
Tiger Claw fasteners are sold (big box chains and other quality lumber
retailers). Ask your retailer or find your nearest dealer at www.deckfastener.com |
|
|
| What promos are available for the
gun? |
New promotional opportunities
are always arising, check with your Tiger Claw Sales Representative for
details. |
|
|
| Who do we call with questions? |
Customer Service is available 7 day a week
by calling 1-800-928-4437 |
|
|
| The fasteners are not holding on
the barrel.Is the tool broke? |
No. The tension on the
fastener can be adjusted with the hex key in the replacement parts kit
to desired tension.If the problem
continues the replacement parts kit can be used to fully swap out the
fastener retainer.See Installation
Instructions. |
|
|
|
Customer Testimonials |
| "You cannot afford to not have
at least one TC-Gun in your toolbox.Get
one before your competition does." Greg DiBernardo,
(Professional Deck Builder Magazine) |
|
|
| This one's a keeper guys.If you use CONCEALoc
or the Tiger Claw fastener for grooved decking, this gun is a must have."
Built by Mac (Contractor Talk Blogger) |
|
|
| "The TC-G fasteners and the
Tiger Claw Installation Gun resulted in one of the nicest deck surfaces
we ever installed." Everett Snyder, (ProTools
Review) |
|
|
| "One wasn't enough... I got
three" Marty, New Jersey |
|
|
| "I'm making a fortune on this
job" Rich, Lake George New York |
|
|
| " It's the only way I put down
decking" NADRA Member, New Jersey |
|
|
|
Exchange Policy |
|
|
| Tiger Claw has such confidence in
the installation gun, we are offering all gun owners
membership to the Express Exchange Program at no charge to ensure you
have a working gun at all times.With
the Express Exchange Program, Tiger Claw will quickly replace your damaged
gun free of charge. |
|
|
|
Tool Registration |
|
|
| Register your gun online and receive
1 free bag of TC-G fasteners |
|
|
| http://www.deckfastener.com/gunregistration |
|
|
|
More Information |
|
|
|
For more information on the Installation
Gun, Express Exchange Program, or any other Tiger Claw product, please
contact us at:TigerClawSupport@deckfastener.com
or 1-800-928-4437. |
|
|
|
| For purchasing information please
contact your local distributor or Tiger Claw Sales Representative. |
