Brand Name:

Tiger Claw Butt Seam Clip: Heavy gauge stainless steel fastener

Origin:

Connecticut, USA

Recommended Use:

Designed to be used with TC-G when butting deck boards on a single joist.

Appearance:

Semi gloss blue finish, rectangular body with a screw hole in the bend of the bottom flange. Two large off set opposing tabs on top, one tab with small points and the other with a rolled edge, one spacer tab on side of fastener body.

Dimensions:

0.512"h x 1.075"w x .085"d

Materials:

.060 304 1/4 roll hardened stainless steel (Semi-magnetic) Yield strength 64.5 kpsi Tensile strength 145.7 kpsi Or: .060 201 1/4 roll hardened stainless stell (Semi-magnetic) Yield strength 75 kpsi Tensile strength 125 kpsi

Finish:

Black oxide with blue topcoat

Workability:

All work can be done quickly and easily from above using basic tools (screw gun)

Recommended Screw Used:

Quality stainless steel #7 x 1 5/8" #1 finish head decking screw. Screws included in each bag.

Gapping:

Butt Seam Clip will automatically create a 3/16" space between each board.

Expansion / Contraction:

Fasteners are designed to allow decking to expand and contract naturally by sliding on the fastener tab and still maintain hold down strength. Butt Seam Clip and TC-G (TC-150) are designed to maintain consistent spacing as deck boards expand and contract. From the point of installation, the fasteners can handle board expansion up to 1/8" and contraction up to 3/16".

Packaging:

55 piece bag 10 bags per master carton

Packaging Content:

Retail Unit: (55) Butt Seam Clips, (55) Stainless steel screws, (1) Drive Bit, (1) Installation Instruction

Retail Unit Dimensions:

(55 piece bag): 9.00" h x 6.00" w x 1.25"d